Model: PMOD-PWR-1030M-ATN-SFF

PMI Model No. PMOD-PWR-1030M-ATN-SFF is a power detector module.  The operating frequency is 1030MHz +/-0.01MHz.  Two pairs of forward and reverse signals are input allowing for a 12 bit linear digital output proportional to the input power.  A GUI is provided to interface through ethernet and allow MCU programming, unit calibration and setting of the variable attenuators.

Quick Links: (click the links below for additional information)

Product Feature

Test Report
Software and Firmware Update Instructions
Binary Conversion Table

Specifications:

Sigma Input Signal
  Frequency

1030 MHz ±0.0 MHz

  Forward Input Power (J1)
+37.16 dBm ±5 dB
(+50dBm No Damage)
  Reverse Input Power (J2)
+22.21 dBm ±1 dB
(+35dBm No Damage)
Omega Input Signal
  Frequency 1030 MHz ±0.01 MHz
  Forward Input Power (J3)
+40.83 dBm ±2 dB
(+50dBm No Damage)
  Reverse Input Power (J4)
+15.42 dBm ±2.5 dB
(+35dBm No Damage)
Synchronize ER/Sync (J11) Specification  
  Pulsewidth
38 usec
  Amplitude
0 to 5 VDC
  Impedance 75 Ohms
GUI

- Interfaces with unit through ethernet connection
- Allows setting of variable attenuators

- Allows calibration of power detectors

- Allows programming calibration table to microcontroller without need for additional hardware

Test Video Specification
  ER/MNTRVID (J5) 0 to 5 VDC Amplitude
Digital Control Lines
(Other than ER/Sync)
TTL Differential Pairs
DC Power

+5 VDC +/-5%
+15 VDC +/-5%

-15 VDC +/-5%

Connectors  
  J1, J2, J3, J4, J5, J11 SMA(F)
  J6 15 Pin Sub-Miniature D Male
  J8, J9 37 Pin Sub-Miniature D Male
  J7 Molex 0878331031 or Equivalent
  J10 Ethernet/ RJ45
Finish Painted Blue

 

Environmental Ratings:

 Temperature:  -20ºC to +55 ºC (Operating)
 -40ºC to +85 ºC
(Storage)
 Humidity:  0% to 100% Including condensation due to temperature changes
 Altitude:

 0 to 10,000 Feet Above Sea Level

 EMI  MIL-STD-461F CE102