Model: PTRAN-100M18G-70-MAH

PMI Model No. PTRAN-100M18G-70-MAH is a transceiver covering the frequency range of 100 MHz to 18.0 GHz. This unit up-converts a 100 MHz to 4.0 GHz transmit signal to the 2.0 to 18.0 GHz frequency range.  It also down-converts a 100 MHz to 18.0 GHz received signal to the 100 MHz to 4.0 GHz intermediate frequency range for analog to digital conversion.

 

 

 

Quick Links: (click the links below for additional information)

Product Feature - PTRAN-100M18G-70-MAH

Product Feature - PTRAN-100M18G-70-MAH Phase 1 Integration
Test Report - PTRAN-100M18G-70-MAH

Test Report - PTRAN-100M18G-70-MAH Phase 1 Integration

Unit Data

  PL14187

  PL14189

Photos of Transceiver with Filter Banks

Transceiver Isometric View

Transmit Switch Filter Bank Information:
Model No. 6SFB-100M18G-1MP-MAH-TX

Receive Switch Filter Bank Information:

Model No. 6SFB-100M18G-1MP-MAH

Switch Filter Bank Plots

Specifications:

Frequency
100 MHz to 18.0 GHz
Inputs

J3, J5, J7, J8

  J3 Input
Input from RX Filter Bank
    Frequency
100 MHz to 18.0 GHz
    Power Level
-74 dBm to -4 dBm +/-3 dBm
(Assuming 6 dB +/-3.5 dB Gain in RX Filter Bank)
  J5 Input IF Input from Backplane
    Frequency
100 MHz to 4.0 GHz
    Power Level
0 dBm typ
  J7 Input LO1 from Backplane
    Frequency
4.0 GHz to 20 GHz
    Power Level
+15 dBm typ
  J8 Input LO2 from the Backplane
    Frequency
4.0 GHz to 20 GHz
    Power Level
+15 dBm typ
Outputs J2, J4, J6
  J2 Output to TX Filter Bank
    Frequency 100 MHz to 18.0 GHz
    Power Level Undefined
(Allow for 0 to +10 dBm Out of TX Filter Bank)
  J4 IF Output to Backplane
    Frequency 100 MHz to 4.0 GHz
    Power Level 0 dBm typical for Non-Linear SDLVA Channels
  J6 Output to RS Filter Bank
    Frequency 100 MHz to 18.0 GHz
    Power Level Undefined
Control Logic LVDS
  TTL 1 SW5 Control - High Frequency or Baseband Channel Select
    0 Baseband Channel (100MHz to 3.0GHz)
    1 High Frequency Channel (3.0GHz to 18.0GHz)
  TTL 2 SW7 Control - Linear or Non-Linear SDLVA 2 Channel Select
    0

Non-Linear Channel

    1 Linear Channel
  TTL 3 SW12 Control - Linear or Non-Linear SDLVA 1 Channel Select
    0 Non-Linear Channel
    1 Linear Channel
  TTL 4 5 Bit Attenuation Control (1dB Steps)
    00000 0 dB Attenuation
    11111 31 dB Attenuation
  TTL 5 SW11 Control - Transmit Path Output Select
    0 Output to TX Filter Bank
    1 Output to RX Filter Bank
  TTL 7 SW9 and SW10 Control - Baseband or Up-Converted Channel Select
    0 Baseband Channel (100 MHz to 4.0 GHz)
    1 High Frequency Channel (2.0 GHz to 18.0 GHz)
  TTL X Lo Select
    00    M1-LO1 M2-LO1
    01 M1-LO1 M2-LO2
    10 M1-LO2 M2-LO1
    11 M1-LO2 M2-LO2
Power Supplies +12 V, -12 V, +5 V, +3.3 V
Size 5.55" x 3.68" x 0.89"
RF Connectors SMA(F)
Digital Connectors 30 Pin Headers to Connect to inrevium TB-FMCL-PH Board
Finish Painted Gray - Epoxy Polomide Coating IAW MIL-C-22750, Type I over Epoxy Polomide Primer IAW MIL-P-23377, Type I, Class 1 or 3
Operating Temperature -40 °C to +85 °C